Enhance your profitability and productivity with our state-of-the-art, plastic injection molding equipment.

    Facilities & Equipment

    State-of-the-art Equipment

    For over 35 years, Pioneer has consistently expanded our capacity as a plastics manufacturer. Our modern, 100,000 square foot facility operates with the finest and equipment that utilizes new technologies to enhance and streamline the custom molding design process for our customers.

    Rapid Prototyping

    You want your prototype quickly. We can handle that. We realize the importance of seeing and using your product in a finished state before production begins. Pioneer will provide you with prototypes in time frames that will meet deadlines and exceed your expectations.

    Technology Available

    3D Printing SLS (Selective Laser Sintering) SLA (Stereolithography Apparatus)

    Production & Distribution Center

    Our 50,000+ square foot production and distribution facility is located in the heart of the Midwest, just a few hours from Indianapolis, St. Louis, Louisville, and Nashville. We have excellent access to all major transportation networks, allowing us to ship your products efficiently.

    Certifications & Standards

    ISO 9001:2015 Certified Lean Manufacturing Certified Employees NSF – Food Service Approved

    Equipment List

    Pioneer currently operates 22 modern plastic injection molding machines ranging from 75-ton to 880-ton clamp force.

    • Cincinnati 880 ton clamping force /232 oz shot size – 1000 ton platen size
    • Cincinnati 880 ton clamping force /140 oz shot size – 1000 ton platen size
    • Cincinnati 850 ton clamping force /140 oz shot size – 1000 ton platen size
    • Mitsubishi 610 ton clamping force /102 oz shot size
    • Cincinnati 500 ton clamping force /54 oz shot size
    • Cincinnati 450 ton clamping force /54 oz shot size
    • Cincinnati 450 ton clamping force /54 oz shot size
    • Cincinnati 440 ton clamping force /54 oz shot size
    • Cincinnati 400 ton clamping force /54 oz shot size
    • Cincinnati 400 ton clamping force /47 oz shot size
    • Mitsubishi 390 ton clamping force /40 oz shot size
    • Toshiba 310 ton clamping force /30 oz shot size
    • Cincinnati 300 ton clamp force /29 oz shot size
    • Mitsubishi 270 ton clamping force /30 oz shot size
    • Sumitomo 242 ton clamping force /18 oz shot size
    • Cincinnati 220 ton clamping force /17 oz shot size
    • Sumitomo 176 ton clamping force /10.5 oz shot size
    • Nissei 150 ton clamping force /10.5 oz shot size
    • Sumitomo 143 ton clamping force /8.5 oz shot size
    • Sumitomo 110 ton clamping force /6 oz shot size
    • VanDorn 75 ton clamping force / 5 oz shot size

    What is clamping force?

    Clamping force refers to the force applied to the mold (or plastic part) by the clamping unit of an injection molding machine. In general, the bigger the part, the more clamping force required.

    What is shot size?

    Shot size refers to the maximum amount of plastic that can be injected in one cycle of injection molding. The bigger the part, the larger shot size required.

    Product Capabilities for our Larger Machines:

    (Refrigerator shelves)     (Washer / dryer doors) (Your Product)

    Product Capabilities for our Smaller Machines:

    Golf Tees   Buttons Your Product

    Assembly & Decoration:

    • 1000 watt ultrasonic welders
    • Vertical hot stamp machines
    • Horizontal roll-on hot stamp machines
    • Heat transfer machine
    • Pad printer
    • Blister pack machine

    Thermoforming:

    • 36” x 36” sheet-fed vacuum form machine